Gps Receiver Setup - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

5. CUSTOMIZING YOUR UNIT
5.7.2

GPS receiver setup

The GPS SETUP menu sets up the GPS Receiver GPS-310B. Press the
[MENU] key followed by the SYSTEM CONFIGURATION, NAV OPTION and
GPS SENSOR SETTINGS soft keys to display this menu.
Item
Local Time GPS uses UTC time. If you would
Offset rather use local time, enter the time
difference between it and UTC. Use
the +< - ->- soft key to switch from
plus to minus and vice versa.
Geodetic Datum Geodetic datum is a reference for
geodetic survey measurements
consisting of fixed latitude, longitude
and azimuth values associated with a
defined station of reference. You
must have the correct geodetic
datum selected in your plotter so that
it will reference the correct point on
the chart for a given latitude and
longitude. Although WGS-84 is now
the world standard, other categories
of charts still exist. Refer to Appendix
for a full list of geodetic datum.
(Con't on next page)
5-22
LOCAL TIME OFFSET
GEODETIC DATUM
POSITION SMOOTHING
SPD/CSE SMOOTHING
GPS SPEED AVERAGING
LATITUDE OFFSET
LONGITUDE OFFSET
DISABLE SATELLITE
LATITUDE
LONGITUDE
ANTENNA HEIGHT
GPS FIX MODE
COLD START
GPS setup menu
Contents of GPS setup menu
Description
GPS
+00:00
SETUP
WGS-84
000 second (s)
EDIT
005 second (s)
060 second (s)
GPS
0.000'N
STATUS
0.000'E
- - - - - -
45 35.000'N
125 00.000'W
RETURN
005 m
2D/3D
NO
Settings
-13:30 to +13:30
hours
See Appendix for
full list.
Default Setting
00:00
WGS-84