Replaceable Parts - KVH Industries Vision C3 Owner's Manual

Satellite television

Hide thumbs

Table Of Contents

Table of Contents

A Guide to TracVision C3

The serial number of your

TracVision C3 will be required

during any troubleshooting or

service calls. You will find the

serial number

at the front of this

manual.

Field Replaceable Units

Should a fuse ever need to be

replaced, TracVision C3 uses

two 5x20mm, 3.15-amp, 250-volt

fast-blow fuses.

To help us continually improve the

quality and reliability of our

systems, please return any failed

component to KVH or KVH Europe

(care of the

mailing address

at the front of this manual) after you

receive your replacement part.

5-2

5.3

TracVision C3 has been designed with durability and low

maintenance in mind. If you experience an operating problem or

otherwise require technical assistance, contact your local

authorized TracVision C3 dealer/distributor first. Have the

antenna unit serial number ready with a list of the trouble

symptoms. If an authorized dealer/distributor is not located

nearby, contact the factory directly at the telephone, facsimile, or

e-mail listings inside the front cover.

Replacement part numbers for units that can be serviced in the

field are listed in Table 5-1. These parts may be obtained from

any KVH authorized dealer/distributor.

Part Name

Table 5-1

Baseplate Assembly

Radome Assembly

Data/Power Cable

RF Cable

PC Cable

CPU PCB

RF PCB

Antenna Gyro

Antenna Gyro Gasket

System Fuses

LNB (European system)

LNB (N. American system)

Switchplate

TV/SAT Switch (optional)

* Baseplate assembly with single-output LNB

** Baseplate assembly with dual-output LNB

†

Specify color when ordering

It is recommended that all other technical difficulties be resolved

by returning the TracVision C3 unit to an authorized service

provider.

listed