Table of Contents
Advertisement
Steps for setting the display and clock
This explanation uses the following examples.
ex.
After reset, the measurement value is not displayed.
The clock is adjusted to 1997/ 05/ 27 14:28.
Press and hold the
Step 1
recorder displays
clock.
Press the
Step 2
AUTO ON/OFF
(A selection where a clock is displayed only in automatic
measurement)
Press the
Step 3
START STOP
Press the
Step 4
START STOP
Press the
Step 5
AUTO ON/OFF
Press the
START STOP
Step 6
Press the
Step 7
AUTO ON/OFF
Press the
Step 8
START STOP
Press the
Step 9
AUTO ON/OFF
Press the
Step10
START STOP
Press the
Step11
AUTO ON/OFF
Press the
Step12
recorder displays the clock.
START STOP
key so as to display
key. The current year is displayed.
key. The current month is displayed.
key to display 5 (for May).
key. The current day is displayed.
key to display 27 (27th day).
key. The current hour is displayed.
key to display 14 (14th hour).
key. The current minute is displayed.
key to display 28 (28th minute).
key to save these parameters. Then the
START STOP
key for approx. 6 seconds. The
for adjusting the display and
Page 17
START STOP
AUTO ON/OFF
.
START STOP
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
Hide quick links:
Advertisement
Table of Contents
