A&D TM-2430 Instruction Manual page 22

Steps for automatic measurement
ex. First block
Second block 22:00 ~ 05:59
Third block
Press and hold the
Step 1
current mode is displayed.
Press the
Step 2 AUTO ON/OFF
mode III.
Press the
Step 3 START STOP
time of the first block is displayed.
Press the
Step 4 AUTO ON/OFF
the start time of the first block.
Press the
Step 5 START STOP
is displayed.
Press the
Step 6 AUTO ON/OFF
as the frequency for the first block.
Press the
Step 7 START STOP
block is displayed.
Press the
Step 8 AUTO ON/OFF
the start time for the second block.
Press the
Step 9 START STOP
block is displayed.
Press the
Step10 AUTO ON/OFF
the frequency of the second block.
Press the
Step11 START STOP
is displayed.
Press the
Step12 AUTO ON/OFF
the start time of the third block.
08:00 ~ 21:59
06:00 ~ 07:59
key for approx. 3 seconds. The
START STOP
key so as to display
key. The mode is stored and the current start
key so as to display "8" for 8:00 hours as
key. The current frequency for the first block
key so as to display "30" for 30 minutes
key. The current start time of the second
key so as to display "22" for 22:00 hours as
key. The current frequency for the second
key so as to display " " for 60 minutes as
key. The current start time of the third block
key so as to display "6" for 6:00 hours as
Page 20
frequency is 30 minutes
frequency is 60 minutes
frequency is 10 minutes
START STOP
for
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
To next page