Wm013 Pump Hood Kit - January 2000 - Phases 2 To 5 - Fisher & Paykel IW509 Service Manual

WIRING CONNECTIONS
WATER VALVES
ROTOR POSITION
SENSOR
DISPLAY
PRESSURE SENSOR
PUMP
MOTOR
OOB
HARNESS
PUMP EARTH
End view of 426418P Motor Controller Module wiring connections.
WM013 PUMP HOOD KIT – January 2000 – Phases 2 to 5
Changes have been made to the pump
hood, cap and the impeller to decrease the
possibility of small pieces of grit and lint
blocking the pump.
When servicing a blocked pump on
Smartdrive, the new pump hood kit, Part
Number 479188P, should be fitted. This
kit cannot be fitted to Phase 1 or early
Phase 2 Smartdrive. It is not required on
Phase 5 Smartdrive built after July 2000.
Pump Hood Kit - Part Number 479188P
- 74 -