Removal Of Inner Basket; Removal Of Clutch Mechanism (Spline Drive / Spline Driven); Removal Of Pump Hood - Fisher & Paykel Ecosmart GWL15-US-96200 Service Manual

517792A
9.12

Removal of Inner Basket

(a) Follow procedures for removal of Neck Ring. (Refer to Section 9.10).
(b) Follow procedures for removal of Agitator. (Refer to Section 9.11).
(c) Lift inner basket upwards and clear of machine.
Note: If the inner basket is tight on the shaft pressure may need to be placed on the top of
the shaft, while at the same time jiggling the inner basket upwards.
Reassembly:
Refit in the reverse manner.
9.13 Removal of Clutch Mechanism (Spline Drive / Spline
Driven)
(a) Follow procedures for removal of Inner
Basket. (Refer to Section 9.12).
(b) Remove the 3 screws securing the spline
driven to the inner basket.
Reassembly:
Refit in the reverse manner. Ensure that the
screws are tightened sufficiently with out over
tightening.
9.14

Removal of Pump Hood

(a) Follow procedures for removal of Inner
Basket. (Refer to Section 9.12).
(b) Remove the bolt securing the pump hood to
outer basket.
Reassembly:
Refit in the reverse manner. Ensure that the
gasket is not pinched between the pump hood
and outer basket.
45