Epson IP-100 Setup And Direct Printing Manual page 74

6. Remove the ink cartridge from its protective bag. Next,
remove only the yellow tape seal from the cartridge.
Black ink cartridge
Caution:
c
You must remove the yellow tape seal from the cartridge.
Leaving the tape on when you install the cartridge will
permanently damage it.
Do not remove the blue portion of the tape seal from the
top of the cartridge; otherwise, the cartridge may become
clogged and cannot print.
Do not remove the tape seal from the bottom of the
cartridge; otherwise, ink will leak.
7. Place the ink cartridge gently into the cartridge holder with
the label on the cartridge face up. Do not press down on the
cartridge.
Color ink cartridge
The illustration shows color
ink replacement. To replace
black ink, install the smaller
cartridge on the left.
Maintenance and Transportation
5
5-5