SHR-2040/2041/2042-ENG-1
SHR-2040/2041/2042 USER'S MANUAL
5-9
2005.6.29
4:58 PM
HDD Mode Setup
HDD End Mode
Stop : Stops recording when HDD is full during the recording.
Overwrite : Deletes the original data and save a new data when HDD is full during the
recording.
HDD End Beep
On : Beeps when the HDD is full in the recording mode.
Off : Although the HDD is full in the recording mode, the beep sound is not heard.
Note
Note
If the HDD is full, the Disk Full Icon(
Page 5-9
) is appeared.