REMOVING THE MOISTURE SENSOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug dryer or disconnect power.
2.
Turn off gas supply to dryer.
3.
Open the dryer door and remove the lint
filter screen.
4.
Remove the two front screws from the
outlet grille.
Lint Filter
Outlet Grille Screws
5.
Remove the three inside screws from the
outlet grille.
Screw
Moisture Sensor
6.
Pull the moisture sensor away from the
dryer and disconnect the black and yel-
low-red wires from the moisture sensor
strips.
Yellow-Red Wire
4-17
Outlet Grille
Screw
Black Wire
Screw