WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug dryer or disconnect power.
2.
Turn off gas supply to dryer.
3.
Pull the dryer away from the wall and
remove the top cover (see steps 4 and 5
on page 4-2 for the procedure).
4.
Remove the console (see page 4-4 for the
procedure). Tip the console back and lay
it on a padded surface.
REMOVING THE DOOR SWITCH
5.
Push the wire holder out of the chassis
hole.
6.
Press a screwdriver blade against the
locking arms on each side of the door
switch, (from behind the cutout), and push
the switch and wiring harness out.
Screwdriver
Removal
Wire Holder
Brown Wire
(N.C.)
White Wire
(COM)
4-6
Door Switch
Blue Wire
(N.O.)