Exterior Lighting And Signals - Renault Latitude Handbook

EXTERIOR LIghTINg ANd sIgNALs

2 3
u
side lights
Turn ring 2 on stalk 1 until the
symbol is opposite mark 3. The side
lights and number plate light come on.
The brightness of the instrument panel
and dashboard can be adjusted by
turning control knob 4. If the side lights
are not switched on, it is not possible
to set the brightness of the instrument
panel with control knob 4.
(1/3)
1
4
k
dipped beam
headlights
manual operation
Turn ring 2 on the stalk until the symbol
is opposite mark 3. This indicator light
on the instrument panel comes on.
Automatic operation
(depending on the vehicle)
Turn ring 2 on the stalk until the AUTO
symbol is opposite mark 3. With the
engine running, the dipped beam head-
lights come on or go out automatically
according to the outside light.
daytime running lights
function
(only relates to front lights)
Depending on the vehicle, the lights
come on without using stalk 1 when the
engine is started.
1
á
main beam headlights
With the engine running and
the dipped beam headlights lit, pull
stalk 1 towards you. This indicator light
on the instrument panel comes on.
To return to the dipped headlights posi-
tion, pull stalk 1 towards you again.
Before driving at night:
check the electrical equip-
ment is operating cor-
rectly, and depending on
the vehicle, adjust your headlights
(if your vehicle is not carrying its
normal load). As a general precau-
tion, check that the lights are not
obscured (by dirt, mud, snow or ob-
jects being transported).
1.67