EXTERIOR LIGHTING AND SIGNALS
Side lights
Turn the end of stalk 2 until the
symbol is opposite mark 1 .
Dipped beam headlight
Depending on the vehicle, turn
the end of stalk 2 down until the
symbol is opposite mark 1 .
Main beam headlights
With the dipped beam
headlights lit, push stalk 2 . The
indicator on instrument panel comes
on.To return to dipped headlight,pull
the stalk 2 upward.
Switching off the lights
Turn the end of stalk 2 until the
symbol is opposite mark 1 .
Daytime running lights function
(front lights only)
If fitted on the vehicle, the daytime
running lights come on automatically
with no action on stalk, when the
engine is started and they go off once
the engine is switched off. When the
position function is ON, the daytime
running lights are switched off.
Headlight flasher : Pull stalk 2
towards you to flash the headlights.
G e t t i n g t o k n o w y o u r v e h i c l e - 4 9
2