Wiper Blades - Renault Latitude Handbook

WIPer BLADeS

replacing windscreen wiper
blades 2
With the ignition on and the engine
switched off, lower windscreen wiper
stalk 1 to position D; wiper arms 3 stop
away from the bonnet.
Lift wiper arm 3, press tab 4 (move-
ment E), move the wiper blade to F
after having separated it from the arm.
2
1
A
B
c
D
to refit
To refit the wiper blade, proceed in the
reverse order to removal. Make sure
that the blade is correctly locked in po-
sition.
Return windscreen wiper stalk 1 to park
position A.
Do not pull up the wiper arm when
it is not stopped away from the
bonnet.
If you pull it up by force, the wiper
arm and bonnet could be damaged.
e
F
3
4
Check the condition of the wiper
blades. You are responsible for their
service life:
– Clean the blades and the wind-
screen regularly with soapy
water.
– do not use them when the wind-
screen is dry;
– free them from the windscreen
when they have not been used
for a long time.
– in frosty weather, make
sure that the wiper blades
are not stuck by ice (to
avoid the risk of the motor
overheating);
– Check the condition of the wiper
blades.
Replace the wiper blades as soon
as they begin to lose efficiency
(approximately once a year).
Whilst changing the blade, take care
not to drop the arm onto the window
after it has been removed as this
may break the window.
5.27