Wiper Blades: Replacement - Renault Arcana User Manual

WIPER BLADES: replacement

1
Replacing the windscreen
wiper blades 2
To replace the wipers, first put them in
the service position B.
Engine running or ignition on;
– set the stalk 1 to position A twice in
succession (single sweep): the wiper
blades will stop in the service posi-
tion B away from the bonnet;
– lift the wiper arm 3;
– lower the 4 tab then remove the
blade 2.
5.28
(1/2)
A
To refit
To refit the wiper blade 2, insert it in its
housing in the arm 3, then clip it until
you hear a click. Make sure that the
blade is correctly locked in position.
To return the blades to lowered posi-
tion, make sure that the blades are
folded down onto the windscreen then
set the 1 stalk to position A (single
sweep): the windscreen wiper blades
will fold into the bonnet when the igni-
tion is switched on.
B
5
Check the condition of the wiper
blades. You are responsible for their
service life:
– clean the blades, windscreen and
– do not use them when the wind-
– free them from the windscreen
2
4
3
rear screen regularly with soapy
water;
screen or rear screen are dry;
when they have not been used
for a long time.