Options | Advanced - ViewSonic Pro10100 User Manual

OPTIONS | Advanced

Direct Power On
Choose "On" to activate Direct Power mode. The projector will automatically power
on when AC power is supplied, without pressing the " " key on the projector control
panel or on the remote control.
Auto Power Off
Sets the countdown timer interval. The countdown timer will start, when there is no
signal being sent to the projector. The projector will automatically power off when
the countdown has finished (in minutes).
Sleep Timer
Sets the countdown timer interval. The countdown timer will start, with or without a
signal being sent to the projector. The projector will automatically power off when
the countdown has finished (in minutes).
Standby Mode
LAN On: Choose "LAN On" when you control the projector via the LAN terminal
`
during power standby.
LAN Off: Choose "LAN Off" to disable the LAN terminal and reduces the power
`
consumption during the power standby.
Baudrate
Select RS232 baudrate from "9600", "19200", or "38400".
57