Installation; Installing The Projector Lens - ViewSonic Pro10100 User Manual

Installation

Installing the Projector Lens

Warning: Do not transport the projector with any lens installed.
1
3
Lens Installing Procedure:
1. Remove the lens ring cover by counter-clockwise rotation. 1
2. Remove the lens cap by counter-clockwise rotation. 2
3. Pull the release bar and push the lens into position. 3
4. Lens assembled by clockwise rotation. 4
5. Lens ring cover assembled by clockwise rotation. 5
Before installing or replacing the lens, switch off the power of the projector.
Avoid using the remote control or projector keypad button to adjust the lens shift or zoom/focus while the
lens is being attached.
5
16
2
4