SETTING | Security
Security Timer
Use this function to set the how long (Month/Day/Hour) the projector can be used.
Once this time has elapsed you will be requested to enter your password again.
Change Password
First time:
`
1. Press "
2. The password has to be 4 digits.
3. Use number button on the remote to enter your new password and then
press "
Change Password:
`
1. Press "
2. Use number button to enter current password and then press "
confirm.
3. Enter new password (4 digits in length) using the number buttons on the
remote, then press "
4. Enter new password again and press "
If the incorrect password is entered 3 times, the projector will automatically shut
`
down.
If you have forgotten your password, please contact your local office for support.
`
Password default value is "1234" (first time).
Always keep the password in your files. If the password is forgotten or lost,
please contact your local authorized service center.
" to set the password.
" key to confirm your password.
" to input old password.
" to confirm.
" to confirm.
43
" to