Manual Rebuild - Batch Mode; Exiting Dell Manager - Dell PowerEdge Expandable RAID Controller 3 User Manual

202
Del l Manager
Manual Rebuild – Batch Mode
Perform the following steps to rebuild more than one drive:
Choose Rebuild from the Management Menu.
1
A device selection window displays the devices connected to the
current controller. The failed drives have FAIL indicators.
Press the arrow keys to select the drives to be rebuilt.
2
After you select the physical drives, press <F10>.
3
Type Yes at the confirmation prompt.
4
The indicators for the selected drives change to REBLD. Rebuilding
can take some time, depending on the number of drives you have
selected and their capacities.
When rebuild is complete, press any key to continue.
5
Press <Esc> to display the Management Menu.
6

Exiting Dell Manager

To exit Dell Manager, press <Esc> from the main menu and choose Yes at
the prompt. A message appears if uninitialized logical drives remain in the
system.