Figure 9-3. J11 Serial Port Pinout; Table 9-4. J10 Nvram Clear Pinout; Table 9-5. J11 Serial Port Pinout - Dell PowerEdge Expandable RAID Controller 3 User Manual

J10 NVRAM Clear
J10 is a 2-pin connector used to clear the memory from the NVRAM, which
stores RAID configuration information. Table 9-4 displays the pinout for
J10.
Ta b l e 9 - 4 . J 1 0 N V R A M C l e a r P i n o u t
Pin
1
2
J11 Serial Port
J11 is a 3-pin header that attaches to a serial cable. Table 9-5 and Figure 9-3
display the pinout.
Ta b l e 9 - 5 . J 1 1 S e r i a l P o r t P i n o u t
Pin
1
2
3
F i g u r e 9 - 3 . J 1 1 S e r i a l P o r t P i n o u t
J13 Dirty Cache LED
J13 is a two-pin connector for an LED mounted on the computer enclosure.
The LED indicates when the data in the cache has yet to be written to the
storage devices. Table 9-6 displays the J13 pinout.
Description
Signal
GND
Description
Receive data
Transmit data
Ground
J11
3 Ground
2 Transmit Data
1 Receive Data
PERC 3/D C or PE RC 3/ D CL Ha r d wa r e In s ta l la ti on
123