Table 9-6. J13 Dirty Cache Led Pinout; Table 9-7. J14 Scsi Activity Pinout; Table 9-8. J16 And J18 Termpwr Enable Settings - Dell PowerEdge Expandable RAID Controller 3 User Manual

124
PERC 3/ DC o r PERC 3/ D CL Har dwa r e I n st a lla t io n
Ta b l e 9 - 6 . J 1 3 D i r t y C a c h e L E D P i n o u t
Pin
1
2
J14 SCSI Activity LED
J14 is a four-pin connector for an LED mounted on the computer enclosure.
Table 9-7 displays the J14 pinout.
Ta b l e 9 - 7 . J 1 4 S C S I A c t i v i t y P i n o u t
Pin
1
2
3
4
J16 and J18 TERMPWR Enable
J16, and J18 are 2-pin connectors that enable termination power to the
SCSI bus for each SCSI channel. The default is pins 1 and 2 jumpered.
Table 9-8 displays the settings for J16 and J18.
Ta b l e 9 - 8 . J 1 6 a n d J 1 8 T E R M P W R E n a b l e S e t t i n g s
Jumper Termination
Power
Channel
J16 0
J18 1
Description
Signal pulled high
Dirty cache signal
Description
VCC
SCSI activity signal
SCSI activity signal
VCC
Settings
Short pins 1-2 to have the PCI bus on the host
computer provide TermPWR. This is the default
setting. Leave open to let the SCSI bus provide
TermPWR.
Short pins 1-2 to have the PCI bus on the host
computer provide TermPWR. This is the default
setting. Leave open to let the SCSI bus provide
TermPWR.