102
PERC 3/ SC H a r d war e Ins ta l lati on
Requirements
This chapter describes the installation procedures for the PERC 3/SC
board. You must have the following:
•
A PERC 3/SC controller
•
A host computer with an available 5 V, 32- or 64-bit PCI expansion slot
•
The PERC 3 installation diskettes
•
The necessary SCSI cables (This depends on the number and type of
SCSI devices to be attached.)
•
Fast, Ultra, Ultra II, and 160M SCSI hard drives
Dell™ strongly recommends that you have an uninterruptible power supply
(UPS) for the entire system.
Optional Equipment
You may also want to install SCSI cables that connect the PERC 3/SC to
external SCSI devices.