Others - Eclipse ESN E3 High-Power CD Receiver with CDC/E-COM/DSP Control and Wireless Remote Model: 54420 Owner's Manual

Basic operation

Others

Disabling the guide tone feature (for button
operation)
The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may
be disabled in the following procedure:
1 . Press and release the [FUNC] button.
2. Press and hold button[6] until the [BEEP OFF]
3. Press the [FUNC] button again.
22
display appears on the screen.
Pressing the button will switch modes between the
[BEEP ON] and the [BEEP OFF].