Removing The Lower Broil Element And The Lower Oven Temperature Sensor - KitchenAid KEBS278SSS - 27" Double Wall Oven Technical Manual

REMOVING THE LOWER BROIL ELEMENT AND
THE LOWER OVEN TEMPERATURE SENSOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug oven or disconnect power.
2. Open the lower oven door.
Broil Element
3. To remove the broil element:
a) Remove the four screws from the front
and rear brackets (see the top right
photo).
Temperature Sensor
Broil Element Screws
b) Pull the broil element forward until you
can access the wire terminals.
c) Disconnect the orange and blue wire
connectors from the broil element ter-
minals and remove the element.
BU
4-27
Broil Element Wires
OR OR
Broil Element
Continued on the next page.
BU