Replacing The Hinge Covers - Gateway 400 Service Manual

Replacing the hinge covers

Tools you need to complete this task:
To replace the hinge covers:
1
Disconnect the AC adapter and modem and network cables and prepare
your notebook by following the instructions in "Preparing your notebook"
on page 7.
2
Turn your notebook over so the bottom is facing up.
3
Remove the battery by following the instructions in "Removing the
battery" on page 8.
4
Turn your notebook over so the top is facing up.
5
Remove the keyboard cover by following the instructions in "Replacing
the keyboard cover" on page 25.
6
Open the LCD panel all the way, so it lies flat on the table.
Flat-blade driver - OR -
www.gateway.com
Replacing the hinge covers
Scribe or non-marring tool
43