Replacing The Keyboard - Gateway 400 Service Manual

Replacing Gateway 400VTX Components

Replacing the keyboard

Tools you need to complete this task:
Screws removed during this task:
4 chrome 2.5 × 3.0 mm
(keyboard)
To replace the keyboard:
1
Disconnect the AC adapter and modem and network cables and prepare
your notebook by following the instructions in "Preparing your notebook"
on page 7.
2
Turn your notebook over so the bottom is facing up.
3
Remove the battery by following the instructions in "Removing the
battery" on page 8.
4
Turn your notebook over so the top is facing up.
5
Remove the keyboard cover by following the instructions in "Replacing
the keyboard cover" on page 25.
28
Flat-blade driver - OR -
Phillips #0 screwdriver
www.gateway.com
Scribe or non-marring tool