Replacing A Rear License Plate Light Bulb - Honda 2011 Odyssey Manual

Hide thumbs Also See for 2011 Odyssey:

Table of Contents

Press the brake pedal to make

sure the new bulb is working.

Put the socket back into the light

assembly, and turn it clockwise to

lock it in place.

Reinstall the high-mount brake

light assembly into the tailgate.

Tighten the two screws and

reinstall the covers.

Replacing a Rear License Plate

Open the tailgate. Place a cloth on

the edge of the cover to prevent

scratches. Remove it by carefully

prying in the notch on its edge

with a small flat-tip screwdriver.

Remove the license light assembly

by squeezing the tabs on both

sides of the socket.

2011 Odyssey

Pull the bulb straight out of its

socket. Push the new bulb in until

it bottoms in the socket.

Turn on the parking lights and

check that the new bulb is

Reinstall the socket. Snap the

cover back in place.