Dvd Player Error Messages - Honda 2011 Odyssey Manual

DVD Player Error Messages

On vehicles with navigation system
The chart on the right explains the
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
The audio system will try to play the
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.
Insert a different disc. If the new
disc plays, there is a problem with
the first disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.
Error Message Cause
FOCUS Error
DISC ERROR
Mechanical Error
MECH ERROR
HEAT ERROR High Temperature
REGION ERR Invalid region code
UNSUPPORTED DVD format not
supported
PUSH EJECT
BAD DISC
Mechanical Error
PLEASE CHECK
OWNERS MANUAL
2011 Odyssey
Ultrawide Rear Entertainment System
Press the disc eject button, and remove the disc.
Check for an error indication. Insert the disc
again. If the code does not disappear, consult
your dealer.
Will disappear when the temperature returns to
normal.
The disc is not playable in this unit. Eject the
disc, and insert a disc compatible with this
system.
Press the EJECT button and pull out the disc.
Check the disc for serious damage, signs of
deformation, excessive scratches, and/or dirt
(see page 353). Insert the disc again. If the code
does not disappear, or the disc cannot be
removed, consult your dealer. Do not try to
force the disc out of the player.
Solution
469