Honda 2011 Odyssey Manual page 635

Hide thumbs Also See for 2011 Odyssey:

Table of Contents

Pull the bulb straight out of its

socket. Push the new bulb straight

into the socket until it bottoms.

Reinstall the socket into the light

assembly by turning it one-quarter

clockwise until it locks.

Turn on the lights to make sure

the new bulb is working.

Ensure that the grommets are still

in place on the body panel.

If the grommets are loose or completely

out of the holes af ter the taillight

assembly is removed, they must be

replaced. Ask your dealer f or more

inf ormation.

Insert the fasteners into the

grommets and push the assembly

back into place. You will hear the

fasteners engage.

Install the mounting bolts and

tighten securely.

2011 Odyssey

Replacing Rear Bulbs

(in Tailgate)

Open the tailgate. Place a cloth on

the edge of the cover to prevent

scratches. Remove it by carefully

prying in the notch on its edge

with a small flat-tip screwdriver.

Determine which of the two bulbs

is burned out: taillight or back-up