Replacing Rear Bulbs - Honda 2011 Odyssey Manual

Lights
BULB
TAB CONNECTOR
Remove the electrical connector
3.
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
4. Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
630
5. Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
6. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
7. Turn on the fog lights to test the
new bulb.
8. Reinstall the inner fender. Make
sure it is installed under the edge
of the front bumper.
9. Reinstall the screws and mounting
bolt on the inner fender cover, and
tighten them securely.
2011 Odyssey

Replacing Rear Bulbs

(in Rear Pillar)
Pull up
Slide
MOUNTING BOLTS
1. Open the tailgate.
Use a Phillips-head screwdriver to
remove the two mounting bolts.