CONNECTOR
3.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
4.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
5.
Insert the new bulb into the hole,
BULB
and turn it one-quarter turn
clockwise to lock it in place.
6.
Push the electrical connector onto
TAB
the new bulb.
7.
Turn on the headlights to test the
new bulb.
8.
Driver's side
Reinstall the air intake duct
securely.
Passenger's side
Reinstall the engine coolant
reserve tank and power steering
reservoir.
2011 Odyssey
Low Beam Headlights
1.
Open the hood.
BULB
CONNECTOR
2.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
3.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
Lights
TAB
CONTINUED
627