Autopage RS-900LCD Operation Manual page 12

Channel # 4 Timer Output (4)
+
Channel # 5 Timer Output (5)
+
Channel # 6 Timer Output (6)
+
LCD DISPLAY TRANSMITTER OPERATION ONLY:
Transmitter Button System Function
System's Trigger Record
-
(C)
Check
- -
System's Status Check
(C)
- Button Lock
( )
Optional Driving Pager
-
( )
Monitor Indoor Temperature
-
( )
LCD screen lamp turns on for
5 seconds.
Clear the Flash Icon and
- -
Melody Sound on the LCD
Screen Transmitter
Warning: Press the
compartment is empty, and then insert the new battery.
B. BUTTON LOCK:
This may be useful if you want to disable the transmission function of the remote
control temporarily to prevent the inadvertent pressing of the buttons. Press the
button first, within 3 seconds press and hold the
seconds to activate or cancel the button lock function. The
on the LCD screen to show the LCD remote transmitter is on "Button Lock".
The 2-way LCD transmitter:
Press the button first, within 3 seconds press
and hold the ( ) button for 2 seconds to activate
or cancel the button lock function.
The icon will be displayed on the LCD screen to
confirm that the LCD remote transmitter is in the
" mode.
"Button Lock
Remark
Press within 3 seconds
Press within 3 seconds
Press within 3 seconds and
Hold
button for 2 seconds
Press within 3 seconds
Press within 3 seconds
Press and hold for 1 second
Press within 3 seconds
button two times when the battery
12
( ) button for 2
icon will displayed