Fisher & Paykel AquaSmart WL26CW1 Installation Instructions & User Manual page 40

Beloire you calll folr selrvice
Please read the following pages before you call for service.
You can correct many of your washer's problems yourself, using the checklists on the following
pages.
'four AqudFmort
TM
is capable of diagnosing its own problems and if it has a problem it will beep
and display a message telling you what is wrong.
If your AquaSmarP _beeps for help
A rnusica_ series of beeps every 5 seconds
and,..
The musical series of beeps is the same sound that your washer makes when you turn it on at
the wall
Wash load is out of balance.
Ensure the washer is stationary and manually redistribute the load
Check your washer is level (refer to Installation instructions pages 6 -- 11),
Check that the inlet hoses are not blocked.
Check that the inlet hoses are not kinked or squashed
Check to see f the drain hose is too low or is pushed into the standpipe too
far. This will cause the water to siphon out of the washer (refer to Installation
nstructions pages .6 - 11).
Your hot water supply may not be hot enough to maintain the selected water
temperature
Select a lower wash temperature
Check that the inlet hoses are not blocked.
Check that the inlet hoses are not kinked or squashed
Check that the inlet hoses have been connected to the correct faucets.
The flow rate of the supply water may be too slow.