Fisher & Paykel AquaSmart WL26CW1 Installation Instructions & User Manual page 12

nstalHation instlructions
It is IMPORTANT to level the washer to ensure good spin performance and effective detergent and
fabric softener dispensing.
1 Separate the 4 rubber foot inserts from the moulding and fit into the feet on the base of the
washer
2 Move the washer to its final position (We suggest a minimum clearance of 1_'(25 ram) each side),
s Adjust the feet so the washer is level and cannot rock,
I" (25 mm) 1"(25 ram)
E I/
Adjustable Feet
h_ Rubber insert c_
f t
Fig.'_Levellingyour washer
Fig.d Minimum dearances
4 Use the walls and adjacent counter tops as a sight guide to check to see if washer appears level.
Readjust the feet if necessary
Open the lid and check the washer tub to see that it sits slightly forward of centre. (See diagram 3).
Ir/correcl Correct
adjustmen_ adjustment
Diagram 3
6 Turn on the water and check all hose connections for leaks. Make sure there are no kinks in the hoses.
7 Uncoil power cord and plug into wall socket.
s Check 'for leaks, noise, vibratiorl, correct water temperatures and proper operation in spin. Check
that the lid locks during spin.