Cleaning The Dispenser - Fisher & Paykel AquaSmart WL26CW1 Installation Instructions & User Manual

Hide thumbs Also See for AquaSmart WL26CW1:
Table of Contents

Advertisement

Available languages

Available languages

Falb,ric Softene,r
Choosing the right cyde
If you wish to use fabric softener you will need to select the FABRIC SOFTENER option
which will
give you a deep rinse. If Fabric Softener is not selected, the softener will not be dispensed.
1
Select your wash cycle. Using the SCROLL buttons,
scroll through
the Cycle choices until the
desired cycle is highlighted,
then press SELECT (refer to page 21 'for more information)
2
Scroll through the Wash Options until SOFTENER is highlighted,
then touch SELECT (refer to page
23 for more information).
:5
Scroll until Fabric Softener ON is highlighted,
touch SELECT to confirm
your choice. You will then
have the option
to save this choce for future washes when using this wash cycle.
Adding the fabric softener
Measure the fabric softener out into the cap and pour into the
Fabric Softener
Dispenser. It will remain in the top of the dispenser
until the deep rinse where water flushes it into the tub
Note: If you fill beyond the MAX mark, the overflow
will pour fabrc
softener into the tub prematurely
and contribute
to scrud.
Cleaning the dispenser
The funnel of the fabric softener
(the top) dicks off easily. Simply place a finger down the center
and lift. The remaining
siphon tube and Fabric Softener well is not removable and needs to be
wiped clean with hot water and an old toothbrush
periodically.
If the siphon tube looks partially
blocked use a cotton bud to clean.
\
\
\
/'
(.
Scrud
Fig.1'_Removing zh_> fabric %h en_>r fu nnH
Scrud is the name of the waxy build--up that can occur within any washer when fabric softener
comes into contact
with detergent.
This build-up
is not brought
about by a fault in the washer
If
scrud is allowed to build--up in the washer it can result in stains on the clothes or an unpleasant
If you wish to use fabric softener we recommend:
Use it sparingly.
Measure it carefully to ensure you do not fill above the MAX level.
Clean the dispenser
as soon as the cycle has finished.
Clean your washer regularly
using the CLEAN ME cycle (see pages 32 and 37).
(']old water washing increases the chance of this build--up occurring. We recommend
a warm or
hot wash at regular intervals eg every 5t_ wash.

Advertisement

Table of Contents
loading

Table of Contents