Fujitsu SPARC Enterprise T2000 Service Manual page 165

Server FRU List (Continued)
TABLE A-1
Item No. FRU
5 DIMMs
6 Power
distribution
board
7 Cable
management
kit
8 Power supply
units (PS)
9 Rear blower
10 LED board
11 Front I/O
board
12 Fan power
board
13 Fans
Replacement
Instructions Description
Section 5.2.3, Can be ordered in the following sizes:
"Removing
• 512 MB
DIMMs" on
• 1 GB
page 5-12
• 2 GB
• 4 GB
Section 5.2.9, Provides the main 12V power interconnect
"Removing the between the power supplies and the other
Power Distribution boards.
Board" on page 5-27
Cable replacement Includes the following: bus bars, hard disk drive
instructions are cable, motherboard I/O cable, PDB-I/O cable,
provided in the PDB-DVD cable, front I/O board cable
corresponding FRU
procedures.
Section 4.3.1, The power supplies provide -3.3 Vdc standby
"Removing a Power power at 3 Amps and 12 Vdc at 25 Amps.
Supply" on page 4-4
When facing the rear of the system, PS0 is on the
left and PS1 is on the right.
Section 4.4.1, Blower.
"Removing the Rear
Blower" on page 4-7
Section 5.2.11, Contains the push-button circuitry and LEDs that
"Removing the LED are displayed on the front bezel of the chassis.
Board" on page 5-32
Section 5.2.15, Front I/O board.
"Removing the
Front I/O Board"
on page 5-35
Section 5.2.13, Houses the connectors and three amber LEDs for
"Removing the Fan the fan assemblies.
Power Board" on
page 5-34
Section 4.2.1,
Fans 0, 1, and 2.
"Removing a Fan"
on page 4-2
Appendix A Field-Replaceable Units
*
FRU Name
See
TABLE 5-1
in
Chapter 5.
PDB
n/a
PS0
PS1
FT2
LEDBD
FIOBD
FANBD
FT0/FM0
FT0/FM1
FT0/FM2
A-5