Manual Pairing - Creative Sound Blaster Tactic3D Rage Wireless Manual

Manual Pairing

Your headset is automatically paired to the wireless transmitter it is packaged with out of the box.
However, certain situations such as the use of a new wireless transmitter, errors in connection etc.
may result in the need to manually pair your headset to the transmitter. The procedure for manual
pairing is as follows:
Step 1 : Activate pairing mode on the headset
Press and hold the Microphone Mute button on the headset for 3 seconds. The connect LED will begin to
flash rapidly.
Step 2 : Activate pairing mode on the transmitter
Press and hold the Connect button on the USB wireless transmitter for 3 seconds. The Connect LED on
the transmitter will begin to flash rapidly.
Step 3 : Pairing success
When the headset and the transmitter are paired, the Connect LED on both devices will stop flashing
and stabilize.
Using Your Sound Blaster Tactic3D Rage Wireless 8