Alarm Output Tab - Setting The Alarm Output; Edge Storage Tab - Setting The Edge Storage; Sd Memory Card; Recording Status - Sony Ipela SNC-VB600 User Manual

The actual image file name will be the specified image
file name with a suffix and the extension .jpg.
Suffix
Select a suffix to be added to the file name used when the
e-mail is sent.
None: The name of the sent file will be the image file
name.
Date & time: The date & time suffix is added to the
image file name.
The date & time suffix consists of the year (2 digits),
month (2 digits), date (2 digits), hour (2 digits),
minutes (2 digits) and seconds (2 digits), and
sequential number (2 digits), thus adding a 14-digit
number to the image file name.
OK/Cancel
See "Buttons common to every menu" on page 14.
Alarm output Tab — Setting the
Alarm output
You can perform setting in this menu to control the
alarm output of the I/O port on the rear of the camera
linked to alarm detection function.
Tip
For details on connection of peripheral devices to the
alarm output of the I/O port, refer to the supplied
Installation Manual.

Alarm duration

Alarm duration 1, 2
Enter the duration for which the alarm is output,
between 1 sec. and 60 sec.
OK/Cancel
See "Buttons common to every menu" on page 14.
Edge Storage Tab — Setting the
Edge Storage
With Edge Storage, video or audio signal can be
recorded from the alarm detection results, such as
network block, recorded video and audio can be
streamed with the same protocol as the real-tim
streaming.
Notes
• The frame rate and operability on the main viewer
may be reduced during image storage.
• Stop the Edge Storage recording when you remove the
SD memory card from the camera or turn off the
power of the camera with a SD memory card inserted.
• Whenever you remove or insert a card, wait at least
10 seconds.
• Before using a SD memory card, format it using the
computer, or by Format SD memory card in the
Initialize tab of the System menu (page 17).
• The supplied ActiveX viewer is not used for streaming
the recorded video or audio data. For details on
supported applications, contact an authorized Sony
dealer.

SD memory card

Display the available free space of external SD memory.
Overwrite
Select On to overwrite the file when there is insufficient
memory space to record the image in the SD memory.
On: Overwrite is enabled and old files will be
overwritten in the order of date.
Off: Overwrite is prohibited. No recording will be
performed.

Recording status

Display the current recording status.
The recording status will not be updated until the screen
is refreshed.
Use the Start and Stop button to start or stop the
recording manually.

Recording mode

Codec
Select the video codec mode you want to record.
For detailed settings of video codec mode, see the Video
codec tab in the Video / Audio menu.
Audio
Set whether to record the audio signals input from the
camera.
Select the checkbox to record.
Note
Audio recording is not available when the Audio codec
in the Audio tab of the Video / Audio menu is set to Off.

Recording capacity

Displays the maximum recording time of the alarm
buffer in the current camera setting of the video mode,
image size, bit rate and frame rate.
Setting the Action output — Action output Menu
33