Folder Structure Of Edge Storage; Setting The Alarm Output - Alarm Output Menu; Alarm Output 1 Tab - Sony Ipela SNC-ER585 User Manual

IP address monitoring
Set the specific IP address of which the network
connection status is to be monitored.
IP address monitoring is not available for IPv6.
Effective period
Set the effective period of Edge Storage
Always: Recording period is always effective.
Schedule: You can specify the period during which
Recording period is effective.
Click Schedule and the menu to display the effective
period. ("Setting the Schedule — Schedule Menu"
on page 88)
OK/Cancel
See "Buttons common to every menu" on page 35.

Folder structure of Edge Storage

When the Edge Storage function is used, images are
recorded with the following folder structure
Root Edge Storage
ch1
A represents a folder created automatically. Every
recording event creates a folder named with recording
date and time.
Folders with maximum storage of 1,000 files are created
in sequence. If more than 1,000 files recorded within one
event, a new folder is created automatically to continue
recording.
For the details about the extension of a file, See "About
the extension of a file" on page 81.
84
Setting the Alarm Output — Alarm output Menu
Recording
aaaaa_001.maf
1
date&time
aaaaa_002.maf
aaaaa_003.maf
2
3
Recording
date&time
Setting the Alarm Output
— Alarm output Menu
When you click Alarm output
menu, the Alarm output menu appears.
You can perform setting in this menu to control the
alarm output of the I/O port on the rear of the camera
linked to alarm detection, the timer and the Day/Night
function.
The Alarm output menu consists of the Alarm output 1
tab.
Tip
For details on connection of peripheral devices to the
alarm output of the I/O port, refer to the supplied
Installation Manual.

Alarm output 1 Tab

Alarm output
To activate the alarm output function, select On.
Mode
Select the mode of the alarm output function from
Alarm, Timer or Day/Night.
Alarm
Controls alarm output by synchronizing it with an
external sensor input or the built-in detection functions.
When Alarm is selected, the items Sensor input 1,
Sensor input 2, Tampering, Motion detection, Alarm
duration and Effective period become active.
Sensor input 1: Select this option when you link the
alarm output to an external sensor that is connected
to sensor input 1 of the camera I/O port.
Sensor input 2: Select this option when you link the
alarm output to an external sensor that is connected
to sensor input 2 of the camera I/O port.
in the Administrator