Streaming Tab; Unicast Streaming; Multicast Streaming; Audio Port Number - Sony Ipela SNC-VB600 User Manual

Alignment
Set the horizontal position of the superimposed text.
OK/Cancel
See "Buttons common to every menu" on page 14.

Streaming Tab

Use this tab to set the items for the transmission by
unicast or multicast.

Unicast streaming

Specify the transmission port numbers of the H.264
video data and audio data to be used when Unicast is
selected from the Connection drop-down list in the
Other panel on the main viewer.
Video port number 1, 2, 3
Specify the transmission port number of the H.264 video
data. It is initially set to 50000.
Specify an even number from 1024 to 65534. Two port
numbers (the number specified here and an odd number
with 1 added to the specified number) are actually used
for video data communication and control. When
performing simultaneous multi-transmission, a different
port number will be used for every transmission, based
on the port number specified here.
The settings for Image 1, Image 2 and Image 3 apply to
Video port number 1, 2 and 3 respectively.

Audio port number

Specify the transmission port number of the audio data.
It is initially set to 58000. Specify an even number from
1024 to 65534. Three port numbers (the number
specified here and an odd number with 1 added to the
specified number) are used for audio data
communication and control. When operating multi-
transmission at the same time, a different port number
will be used in every transmission based on the port
number specified here.
Note
Specify different numbers for the video port number and
the audio port number.
RTSP video port number 1, 2, 3
Specify the H.264 video transmission port number used
for RTSP unicast streaming. The default setting is
51000. Specify an even number from 1024 to 65534.
Two port numbers (the number specified here and an
odd number with 1 added to the specified number) are
actually used for video data communication and control.
When performing simultaneous multi-transmission, a
different port number will be used for every
transmission, based on the port number specified here.
22
Setting the Camera Image and Audio — Video / Audio Menu
The settings for Image 1, Image 2 and Image 3 apply to
RTSP video port number 1, 2 and 3 respectively.
RTSP audio port number
Specify the audio transmission port number used for
RTSP unicast streaming. The default setting is 57000.
Specify an even number from 1024 to 65534. Two port
numbers (the number specified here and an odd number
with 1 added to the specified number) are actually used
for audio data communication and control. When
performing simultaneous multi-transmission, a different
port number will be used for every transmission, based
on the port number specified here.

Multicast streaming

Set whether the camera uses multicast streaming for
H.264 video data and audio data or not. It reduces the
transmission load on the camera by having a computer
of the same segment network receive the same
transmitting data.
Select the checkbox to allow multicast sending.
When you select the checkbox, set Multicast address,
Video port number and Audio port number properly.
Multicast address 1, 2, 3
Type the multicast address used on the multicast
streaming.
Video port number 1, 2, 3
Specify the H.264 video transmission port number used
for the multicast streaming. It is initially set to 60000.
Specify an even number from 1024 to 65534. Two port
numbers (the number specified here and an odd number
with 1 added to the specified number) are used for video
data communication and control.
The settings for Image 1, Image 2 and Image 3 apply to
Video port number 1, 2 and 3 respectively.
Audio port number
Specify the audio transmission port number used for the
multicast streaming. It is initially set to 58000. Specify
an even number from 1024 to 65534. Two port numbers
(the number specified here and an odd number with 1
added to the specified number) are used for audio data
communication and control.
Note
Specify different numbers for the video port number and
the audio port number.
RTSP multicast address
Set the multicast address used on RTSP multicast
streaming.