Streaming Tab; Multicast Address; Audio Port Number; Multicast Streaming - Sony Ipela SNC-CH135 User Manual

Note
Audio may be interrupted depending on the selected
bandwidth. In this case, select a wider bandwidth.
OK/Cancel
See "Buttons common to every menu" on page 33.

Streaming Tab

Use this tab to set the items for the transmission by
unicast or multicast.
Unicast streaming
Specify the transmission port numbers of the MPEG4/
H.264 video data and audio data to be used when
Unicast is selected from the Connection drop-down list
in the Other panel on the main viewer.
Video port number 1, 2
Specify the transmission port number of the MPEG4/
H.264 video data. It is initially set to 50000.
Specify an even number from 1024 to 65534. Two port
numbers (the number specified here and an odd number
with 1 added to the specified number) are actually used
for video data communication and control.
The setting for Image 1 and Image 2 apply for Video port
number 1 and 2 respectively.

Audio port number

Specify the transmission port number of the audio data.
It is initially set to 50002. Specify an even number from
1024 to 65534. Two port numbers (the number specified
here and an odd number with 1 added to the specified
number) are used for audio data communication and
control.
Note
Specify different numbers for the video port number and
the audio port number.

Multicast streaming

Set whether the camera uses multicast streaming for
MPEG4/H.264 video data and audio data or not. It
reduces the transmission load on the camera by having a
computer of the same segment network receive the same
transmitting data.
50
Setting the Camera Image and Audio — Camera Menu
Select On to allow, or Off not to allow multicast
sending.
When you select On, set Multicast address, Video port
number and Audio port number properly.

Multicast address

Type the multicast address used on the multicast
streaming.
Video port number 1, 2
Specify the MPEG4/H.264 video transmission port
number used for the multicast streaming. It is initially
set to 60000. Specify an even number from 1024 to
65534. Two port numbers (the number specified here
and an odd number with 1 added to the specified
number) are used for video data communication and
control.
The setting for Image 1 and Image 2 apply for Video port
number 1 and 2 respectively.
Audio port number
Specify the audio transmission port number used for the
multicast streaming. It is initially set to 60002. Specify
an even number from 1024 to 65534. Two port numbers
(the number specified here and an odd number with 1
added to the specified number) are used for audio data
communication and control.
Note
Specify different numbers for the video port number and
the audio port number.
OK/Cancel
See "Buttons common to every menu" on page 33.