Operation and maintenance areas (with the
Figure 2.L
powered
FCT unit .................................................
Forms ....................................................
Curled forms ............................................. 2 - 11
Forms
Figure 2.9
Leftmost
Figure 2.11
Protrusion and separation of the outer layer at the
perforation
Figure 2.15
Allowable incorrect alignment of multiple-pzrt
Self-adhesive
Figure 2.18
Figure 2.19
Specifications
Printer
Figure 3.1
Figure 3.2
Control
Basic
Figure 4.1
Figure 4.2
Print
Figure 4.3
Basic
Figure 4.4
Timing of signals in data transfer .......................
DPC-compatible
Figure 4.5
DPC-compatible
(Winchester
Channels specified for a forms feed format ...............
Figure 4.10
the operator panel ....................................... 4 - 19
Character
Figure 5.2
Control
Figure 5.3
DC3 code receive timing .................................. 5 - 7
Figure 5.5
Figure 5.7
Figure 5.8
Centronics-compatible
ILLUSTRATIONS
stacker) ......................................... 2 - 8
puller ............................................. 2 - 10
lids ..................................... 2 - 12
container
and
rightmost
of
multiple-part
forms ................................ 2 - 18
FCT .................................... 2 - 20
of
configuration .................................... 3 - 1
unit .............................................
operations ......................................... 4 - l
operation .......................................... 4 - 2
data
transfer
interface
interface
type) ........................................ 4 - 8
code
transfer
code
receive
data receive timing chart ............................
print
positions ...................
forms .......................
paper ............................... 2 - 15
operation ............................ 4 - 5
signal
driver
connector
pin
timing ...........................
timing .............................. 5 - 5
interface
signal
forms ..... 2 - 16
and rseceiver ...... 4 - 6
assignment
1 - 2
2 - 4
2 - 5
2 - 7
2 - 9
2 - 11
2 - 13
2 - 13
2 - 14
2 - 17
3 - 4
4 - 5
4 - 7
4 - 15
4 - 17
5 - 5
5 - 7
5 - 8
... 5 - 9