Table of Contents
Advertisement
commands are used in the following modes:
. 15line
feed mode
A maximum of 15 lines can be fed.
. 63-line feed mode
A maximum of 63 lines can be fed.
the number of lines fed.
One of these modes can be selected at the operator panel.
selection
When the printer receives a Space command, the printer feeds forms the
specified number of lines after printing all characters in the PDB. If
the Space command is received before the 132nd (or 136th:I
the remaining characters are treated as spaces.
received without character codes,. the printer does not print, it only
feeds
forms.
WIF5 must be 1 because WIFS
If a Space command attemps
feed can be stopped at the TOF position. This feature is called the
"step-count
For the setting method, refer to
panel.
4
WIF8 is ignored.
method, refer
to Operator's
This feature can also be set up at the operator
truncate".
WIF6 to WIF8 are ignored.
WIF7, WIF6, and WIF4 to WIFl indicate
Guide.
indicates Space commands.
to feed forms past the TOF position, the forms
Operator's
For the
character code,
If the Space command is
Advertisement
Table of Contents
