3. Diagnostic aids
Single test page
This test prints a test page.
To run a complete test page of black and color patterns, be sure the print
cartridges are in good condition.
To enter the test:
1. Turn on the All-In-One.
2. Lift the scanner unit.
3. Install a good black print cartridge in the left side of the carrier and a
good color cartridge in the right.
4. Close the scanner unit.
5. Load paper in the paper support.
6. Turn off the All-In-One.
7. Press and hold the Black Copy button and the Power button
simultaneously until Mfg Menu Enabled appears on the LCD.
8. Release both buttons.
9. Press the Arrow button until LCD Button Test appears.
10. Press the Plus (+) button until Single Test Page appears.
11. To perform the test, press the Arrow button.
The single test page consists of the following information:
•
Build Date
•
Code Level - Page Count
•
Last Error
•
Maint
•
USB Serial Number
•
MFG
•
CMD
•
Model
•
Class
•
USB Vendor ID
•
Digital Logic Type
•
Printer Engine
•
Printhead Type
•
Scanner
4479-XXX
3-1
Diagnostic aids