Lexmark 3350 - X Color Inkjet Service Manual page 16

4479-XXX
Buttons
Cancel
+/-
Arrow
Color Copy
Black Copy
Scan
1-4
Service Manual
Functions
During a computer print job, the Cancel button cancels
the job by sending the "cancel print" alert to the
computer, and the ejects the page.
During a computer scan job, this button cancels the job
by sending a "scan abort" command to the computer.
During a computer copy job, this button performs a
combination command to cancel the print and scan
job.
During a standalone copy job, this button cancels the
copy job and ejects the page.
The All-In-One stays on after a job has been canceled.
When the LCD is on the default page, the +/- buttons
are used to increase or decrease the number of
copies. When in other menus, the +/- buttons are used
to scroll through the available settings.
The Arrow button is used to scroll through the available
menus. For this reason, the Arrow button is also
referred to as the menu button. Each time the Arrow
button is pressed, the next menu item on the LCD is
selected. If a setting in a menu is changed, pressing
the Arrow button will save the setting and proceed to
the next menu item.
The Arrow button is also used during special
conditions when the user needs to make a selection. In
all cases where a selection is necessary, the +/-
buttons are used to scroll through the choices and the
Arrow button is used to make the selection.
The All-In-One is equipped with a green Color Copy
button. The primary function of the Color Copy button
is to initiate color copies when the All-In-One is idle.
The All-In-One is equipped with a Black Copy button.
The primary function of the Black Copy button is to
initiate grayscale copies when the All-In-One is idle.
Pressing the Scan button sends a message to the host
computer causing the All-In-One Center to open and
perform a preview. The Scan button has no function
defined for non-host attached operation.