Lexmark 3350 - X Color Inkjet Service Manual page 23

Code Name
1218 Serial Flash
Error
1219 Undefined
Signal Error
2200 Scan Carrier
Stall
120A Undefined
Error
Description
Invalid parameters
have been passed to
ReadFlashPage.
Microprocessor has
encountered a bad
signal (other than an
abort, illegal
instruction, or
arithmetic exception).
The scan carrier has
stalled.
Microprocessor has
encountered an abort
or undefined
instruction.
Action
Unplug the All-In-One;
wait a few seconds,
then plug the
All-In-One back in and
turn the power on. If
the error remains,
clean the NVRAM by
pressing the Black
Copy button and
Power button
simultaneously until
the Mfg Menu
Enabled message
appears. Select Clean
NVRAM. If the error
continues, replace the
system board.
Unplug the All-In-One;
wait a few seconds,
then plug the
All-In-One back in and
turn the power on. If
the error remains,
replace the system
board.
Unplug the All-In-One;
wait a few seconds,
then plug the
All-In-One back in and
turn the power on. If
the error remains,
replace the system
board.
Unplug the All-In-One;
wait a few seconds,
then plug the
All-In-One back in and
turn the power on. If
the error remains,
replace the system
board.
Diagnostic information
4479-XXX
2-5