Kyocera TASKalfa 3051ci User Manual page 53

following order and be separated from each other by a comma:
1. No. of the symbol within a group, usually No. 1; the highest possible No. is
8.
2. Total number of symbols of this group, usually 1; the highest possible
number of symbols in any given group is 8.
3. Mode; this is defined by the specification. As a general rule, it is mode 2
when using numerical postal codes and mode 3 when using alphanumeric
postal codes. Mode 2 is used mainly in applications in the USA and mode 3 is
generally used outside of the USA.
4. Postal code
5. Country code
6. Service class
Secondary information
The secondary information often begins with the character string "[)>"+ RS
character (=field separator, ASCII character 30). The individual fields are
separated by a GS character (=group separator, ASCII character 29) and the
complete secondary information is closed with the RS character (=field
separator, ASCII character 30) and the EOT character (=end of transmission,
ASCII character 4), as shown in the following example.
Although the rules for the secondary information are not mandatory from the
point of view of the MaxiCode, they are very widespread in dispatch systems
throughout the world and should be observed for this reason. All data should
be entered in capital letters.
The postal code may contain up to 9 digits in mode 2 (numerical) and up to 6
capital letters or digits in mode 3 (alphanumerical).
Specific secondary information:
1.
Ansi header: [)><RS>01<GS>96
2.
Tracking number<GS>
SCAC<GS>
UPS Shipper number<GS>
Julian day of pickup<GS>
Shipment ID<GS>
Package x of y<GS>
53