Kyocera TASKalfa 3051ci User Manual page 19

FS-C5400DN
FS-C8008N
FS-C8026N
FS-C8100DN
FS-C8100DN+
FS-C8500DN
FS-C8600DN
FS-C8650DN
KM-4800w
TASKalfa 2420w
TASKalfa 4820w
A = Compatible with card type A (Compact Flash card)
B/C = Compatible with card type B/C (Compact Flash card)
D = Compatible with card type D (Secure Digital card)
- = Not applicable / not supported. Solution will not run on these devices.
An up-to-date compatibility
www.kyoceradocumentsolutions.eu
Note
Please note that some KM series multifunction devices have to be fitted with a
printer board first
Note
For some of the older supported devices, it might in certain cases be
necessary to make a firmware update.
Note
PCL Barcode Flash assumes that you have a free CF/SD card slot in your
printer or multifunction device.
Note
The following minimum requirements for the device used should be met so
that PCL Barcode Flash can run without complications:

Firmware as of April 2001 or newer

Min. 16 MB RAM recommended. Less RAM may lead to errors.
B/C
A
A
A
A
A
B/C
B/C
-
-
-
list is available
19
in the service area of