Removing The Camera Module - Dell Inspiron 15 Intel Service Manual

Back to Contents Page
Camera Module
Dell™ Inspiron™ N5010/M5010 Service Manual
Removing the Camera Module
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Camera Module
1. Follow the instructions in Before You
2. Remove the battery (see Removing the
3. Remove the base cover (see
4. Remove memory module(s) (see
5. Remove the optical drive (see
6. Remove the keyboard (see
7. Remove the palm rest (see
8. Remove the display assembly (see
9. Remove the display bezel (see
10. Remove the display panel (see
11. Peel off the metallic tape that secures the camera module to the display cover.
12. Remove the camera module from the latches that secure it.
13. Lift the camera module off the display cover.
1 latches (2) 2 camera module
3 metallic tape
Begin.
Battery).
Removing the Base Cover).
Removing the Memory Module(s)).
Removing the Optical Drive).
Removing the Keyboard).
Removing the Palm Rest).
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).
Removing the Battery) before working inside the