Dell XPS 15 9530 Connection Manual
External display
Hide thumbs
Also See for XPS 15 9530:
- Setup and specifications (22 pages) ,
- Service manual (75 pages) ,
- Setup and specifications (25 pages)
Related Manuals for Dell XPS 15 9530
Summary of Contents for Dell XPS 15 9530
- Page 1 XPS 15 9530 External Display Connection Guide Regulatory Model: P91F Regulatory Type: P91F004/P91F005 March 2023 Rev. A00...
- Page 2 A WARNING indicates a potential for property damage, personal injury, or death. © 2023 Dell Inc. or its subsidiaries. All rights reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
-
Page 3: Table Of Contents
Contents Chapter 1: Before you begin......................4 Modes of connection................................4 Turn off the computer display............................5 Chapter 2: Connect external displays.................... 6 Integrated graphics................................6 Chapter 3: Troubleshooting......................10 Chapter 4: Getting help and contacting Dell................. 11 Contents... -
Page 4: Chapter 1: Before You Begin
Before you begin You can connect up to three 4K external displays using the USB-C ports available on your XPS 15 9530. Before you begin, ensure that you check the ports available on your external displays and decide on the modes of connection. -
Page 5: Turn Off The Computer Display
Turn off the computer display There may be instances where you may want to turn off the computer's display to connect more external displays. You can turn off the display of your computer by using the Intel Graphics Command Center. NOTE: Connect and configure at least one external display before disabling the computer display. -
Page 6: Chapter 2: Connect External Displays
Integrated graphics Connecting external displays to XPS 15 9530 NOTE: When connecting a display using an adapter or docking station, it is recommended that you connect the display to the docking station first, and then connect the docking station to the USB-C port on your computer. - Page 7 ● Connect an external display using a USB-C cable to Thunderbolt, HDMI, or DisplayPort adapter. ● Connect up to three external displays using a USB-C docking station, or USB-C cable to Thunderbolt, HDMI, or DisplayPort adapter. With the computer display turned off NOTE: Ensure that you turn off your computer's display before connecting the external displays.
- Page 8 NOTE: The resolution, refresh rate, and maximum number of external monitors supported by the dock are dependent on the compatibility between computer and dock. You can connect up to three external displays directly to the Type-C ports on your computer or you can connect the displays to the computer using the docking station.
- Page 9 Connect external displays...
-
Page 10: Chapter 3: Troubleshooting
Troubleshooting No display or Blank screen after display Multi-Stream Transport (MST) option is turned off through WD19/ WD19TB/WD19DC series docking stations Question When the display Multi-Stream Transport (MST) is turned OFF through WD19/WD19TB/WD19DC series docking stations, the display does not power on or has a blank screen. Cause Multi-Stream Transport (MST) hub do not have any specific definition for handling or deal with this kind of DisplayPort Configuration Data (DPCD) change. -
Page 11: Chapter 4: Getting Help And Contacting Dell
Getting help and contacting Dell Self-help resources You can get information and help on Dell products and services using these self-help resources: Table 2. Self-help resources Self-help resources Resource location Information about Dell products and services www.dell.com My Dell app...