Table of Contents
Advertisement
Back to Contents Page
Internal Module With Bluetooth® Wireless Technology
Dell™ Inspiron™ N5010/M5010 Service Manual
Removing the Bluetooth Module
Replacing the Bluetooth Module
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.
Removing the Bluetooth Module
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the base cover (see
4. Remove memory module(s) (see
5. Remove the optical drive (see
6. Remove the keyboard (see
7. Remove the palm rest (see
8. Lift the Bluetooth module to disconnect it from the connector on the system board.
1
Bluetooth module
Replacing the Bluetooth Module
1. Follow the instructions in
Before You
2. Align the connector on the Bluetooth module with the connector on the system board and press the Bluetooth module until it is fully seated.
3. Replace the palm rest (see
Begin.
Battery).
Removing the Base
Cover).
Removing the Memory
Module(s)).
Removing the Optical
Drive).
Removing the
Keyboard).
Removing the Palm
Rest).
Begin.
Replacing the Palm
Rest).
Removing the
Battery) before working inside the
Hide quick links:
Advertisement
Table of Contents
